no spark

2000 TOYOTA
2.0L • 4 CYL • 2WD • AUTOMATIC
Avatar
GESHOM
  • MEMBER
  • 1 POST
i have a Toyota Noah checked all electrical and sensors but vehicle has no spark. where should i start from?

Its only giving me P1755 and P1760. These codes are for transmission. Can these codes make a vehicle fail to start?

It is a Toyota Noah (Voxy type) with a 1AZ engine. It also has the injector drive ECU.
Jun 18, 2014 at 4:52 PM
Advertisement
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,855 POSTS
Hello,

It sounds like the crankshaft angle sensor has gone bad which is common for these cars. Here is a guide to shot you what you are in for when changing the sensor.

https://www.2carpros.com/articles/crankshaft-angle-sensor-replacement

and a guide (below) so you can see what it is like on your car.

The transmission codes will not make the engine not start.

Please let us know what happens.

Cheers, Ken


Jun 10, 2017 at 11:27 AM
Avatar
JAQUES
  • MEMBER
  • 1 POST
I had to change the main fuse after polarity was swaped during a jump start. Now there is no spark
Jun 10, 2017 at 11:28 AM (Merged)
Advertisement
Avatar
CARADIODOC
  • CERTIFIED EXPERT
  • 34,308 POSTS
Expect to find a lot of other blown fuses. There are a lot of complicated computers on cars today that will be damaged from reverse polarity. They have diodes built in to create a short on the line to force fuses to blow before that damage to the computers takes place. Most of the time those diodes save the computers.
Jun 10, 2017 at 11:28 AM (Merged)
Avatar
DONALD CHIMUSORO
  • MEMBER
  • 2 POSTS
no spark and gear notification not coming on
Aug 29, 2017 at 4:49 AM
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,855 POSTS
Have you checked all of the fuses? Here is a guide to help test with the key on here is the locations (below)

https://www.2carpros.com/articles/how-to-check-a-car-fuse

Please let us know what you find.

Cheers, Ken
Aug 30, 2017 at 10:27 AM