SPONSORED LINKS

Have to change lower ball joint

Tiny
TRUCKSTER2012
  • MEMBER
  • 2000 SUBARU IMPREZA
  • 13,500 MILES
Have to change lower ball joint cant get pinch bolt out as there s no hexagon head on one side would it come out with punch or can I drill it out

Replacing lower ball joints
Thursday, March 1st, 2012 AT 4:32 PM

3 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Would it come out with what?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, March 1st, 2012 AT 5:08 PM
Tiny
TRUCKSTER2012
  • MEMBER
  • 2 POSTS
With drilling it out as ive been told you can punch it out
Was this
answer
helpful?
Yes
No
Thursday, March 1st, 2012 AT 9:07 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
If you cut the head of the bolt off or cut the nut off then you can use a punch to get the bolt out.
Was this
answer
helpful?
Yes
No
Thursday, March 1st, 2012 AT 10:03 PM

Please login or register to post a reply.

Related Ball Joint Replace/Remove Content

Ball Taper Joint Release
GUIDE
Ball Taper Joint Release
The car must be jacked up off the ground and supported on jack stands. You may need to remove the wheel to be able to access the ball joint more freely. There are two...

Sponsored links