ingear 6500 rpm

2000 SATURN STATION WAGON
267,000 MILES
Avatar
WILLIAMMOO
  • MEMBER
  • 8 POSTS
changed plugs o2sensers tps put seafoam in to clean injectors
Dec 17, 2011 at 8:45 PM
Advertisement
Avatar
RASMATAZ
  • ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
Clean the idle air control valve and also check for vacuum leak
Dec 17, 2011 at 8:53 PM
Avatar
SATURNTECH9
  • ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
Just to add to this one do you have the S model or the LW model?Also what engine do you have?Do you mean it idles at 650 rpms not 6500rpms in gear at idle?
Dec 18, 2011 at 1:05 AM
Avatar
WILLIAMMOO
  • MEMBER
  • 8 POSTS
2.2 lw
Dec 18, 2011 at 3:50 PM
Avatar
WILLIAMMOO
  • MEMBER
  • 8 POSTS
how to Clean the idle air control valve
Dec 18, 2011 at 3:51 PM
Avatar
SATURNTECH9
  • ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
So is the idle rpm a rough 650rpm in gear?If so try putting on the a/c if it works and see if the rpms bump up and the idle smoothes out?As far as cleaning out the idle air control i would just remove it is right there and it will get a batter clean that way.I would also spray and clean its port with some carb spray.
Dec 18, 2011 at 4:23 PM
Avatar
WILLIAMMOO
  • MEMBER
  • 8 POSTS
ty
Dec 18, 2011 at 5:23 PM
Avatar
WILLIAMMOO
  • MEMBER
  • 8 POSTS
Cleaned the idle air control valve now 7500rpm in gear not ruff ty
Dec 18, 2011 at 7:06 PM
Avatar
SATURNTECH9
  • ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
Glad to hear you got it all fixed thats what we like to hear.
Dec 18, 2011 at 9:37 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.