My driver seat wont go backwards or forward and I have changed the fuses which were blown, what can be the problem?
Thursday, July 7th, 2011 AT 11:40 PM
7 Replies
SATURNTECH9
MECHANIC
30,869 POSTS
First of all you can't have a SL2 with a power seat unless someone installed it aftermarket that wasn't ever a option on that model. Do you have a LS model if so a LS1 or LS2 model?Also what was the fuse labeled you replaced?Are you sure the fuse didn't blow again?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-1
Thursday, July 7th, 2011 AT 11:45 PM
FUNDWAYNE
MEMBER
5 POSTS
Sorry its a 2000 ls2
Was this
answer
helpful?
Yes
No
-1
Friday, July 8th, 2011 AT 12:05 AM
SATURNTECH9
MECHANIC
30,869 POSTS
That's what I figured. Also what was the fuse labeled you replaced?Are you sure the fuse didn't blow again?
Was this
answer
helpful?
Yes
No
Friday, July 8th, 2011 AT 12:22 AM
FUNDWAYNE
MEMBER
5 POSTS
Not sure will check thank you
Was this
answer
helpful?
Yes
No
Friday, July 8th, 2011 AT 12:24 AM
SATURNTECH9
MECHANIC
30,869 POSTS
Let me know what its labeled and if its the seat fuse blown again you will have to remove the drivers seat turn it upside down and find the power wire shorted to frame.I have found a lot of those seats blowing the fuse because of a power wire shorted to the frame. Let me know what you find.