Need a diy dependable Saturn SL1 5 speed shifter to cable linkage repair.

DIY73

MEMBER
2000 SATURN SL1
165,000 MILES

Shift cable loose from shifter. Has a pin that connects to that is shaped like a ball for connecting a trailor. Need an at home repair solution that works well to repair and hold cable on the shifter. All help is greatly appreciated thank you.

Sunday, April 29th, 2012 AT 11:17 AM

5 Replies

ASEMASTER6371

MECHANIC
52,797 POSTS

Can you send us a picture of what your dealing with?

Roy

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Sunday, April 29th, 2012 AT 12:46 PM

DIY73

MEMBER
2 POSTS

I was by sheer luck able to find the plastic piece that snaps into the end of the shifter cable then snaps over the pin on the shifter. It had somehow made its way into an air duct. I would like to apologize for taking up your time and I thank you. I like this site and more than likely will be back in the future. Much thanks.

Was this

answer

helpful?

Yes

No

Sunday, April 29th, 2012 AT 2:42 PM

ASEMASTER6371

MECHANIC
52,797 POSTS

Good, glad you got it fixed

Roy

Was this

answer

helpful?

Yes

No

Sunday, April 29th, 2012 AT 2:49 PM

SATURNTECH9

MECHANIC
30,869 POSTS

Just to add to this one the cable end will pop off again there is ua repair of a new cable end cap.I tried the dorman one it pop off a short time later here is the link to the one that actually worked i replaced the dorman one with.

http://item.mobileweb.ebay.com/viewitem?itemId=170769768863&index=3&nav=SEARCH&nid=58882830106

Was this

answer

helpful?

Yes

No

Sunday, April 29th, 2012 AT 4:02 PM

SATURNTECH9

MECHANIC
30,869 POSTS

Also you were talking about at the base of the shifter inside the car and and it was the black cable end that broke correct?If so then the info I gave for repair is correct.