Hello, I was wondering the.

TOKI TOVER

MEMBER
2000 SATURN SL1
107,000 MILES

Hello,

I was wondering the process to replace the engine valve cover gaskets. Is it hard?

There is oil leaking from the two circle rubber pieces on the top of the cover and all around where the cover meets the engine.

Thanks!

Toki

3 Replies

SATURNTECH9

MECHANIC
30,869 POSTS

Its really easy I would get the perma dry gasket made by fel pro.

Was this

answer

helpful?

Yes

No

Thursday, April 4th, 2013 AT 7:51 PM

TOKI TOVER

MEMBER
25 POSTS

Ok thanks for that suggestion. Does that dry gasket come in a set with the two circle gaskets?

Is there a detailed process for my car on how to change these?

Do I need to change the oil? Will oil leak out when I take the cover off?

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Thursday, April 4th, 2013 AT 9:41 PM

SATURNTECH9

MECHANIC
30,869 POSTS

Its pretty straight forward loosen the two T-40 torx bolts remove the two 10 mm nuts and map sensor and the 10mm bolt holding the coolant return pipe. Then removed the valve cover use a small pocket screw driver to scrape the silicone out of the gasket surface. Yes it comes with the grouments and no you won't loose oil.

Was this

answer

helpful?

Yes

No

Friday, April 5th, 2013 AT 2:57 AM