I have an old , 2000 kia sportage. The co2 sensor that normally screws in AND out, SHEARED off flush. Now, how can I remove?? thank you, Jill
Sep 24, 2011 at 11:09 PM
How do I remove sheared off co2 sensor
JBBMATOUS
- MEMBER
- 1 POST
Jill:
You can try drilling it out and then using an easy-out. However, if it was that tight, chances are it still won't come out. If that is the case, drill as much of it out as you can without damaging the threads and then, when it is thin enough, carefully pry the remains of the sensor out. Not a fun job.
You can try drilling it out and then using an easy-out. However, if it was that tight, chances are it still won't come out. If that is the case, drill as much of it out as you can without damaging the threads and then, when it is thin enough, carefully pry the remains of the sensor out. Not a fun job.
Sep 24, 2011 at 11:17 PM
You most probably need a tap to repair the threads for the new O2 sensor.
Sep 25, 2011 at 1:02 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.