How do I change the washer fluid pump and hose, for a 2000 Hyundai accent?
Feb 4, 2011 at 11:24 PM
Washer fluid pump
2000 HYUNDAI ACCENT
KJMUSIAL
- MEMBER
- 1 POST
Advertisement
KHLOW2008
- ✓ASE Certified Mechanic
- 41,814 POSTS
This is a straight forward job. You need to access the fluid pump under the reservoir. Pump is plugged in and can be removed by prying it out after disconnecting the wire connector.
Part of hose could be obstructed by other components which might have to be removed to gain access. You can try tying a piece of string to the old hose and pulling the hose out. The string would help get the new hose into position by pulling it backwards to point of installation.
Part of hose could be obstructed by other components which might have to be removed to gain access. You can try tying a piece of string to the old hose and pulling the hose out. The string would help get the new hose into position by pulling it backwards to point of installation.
Feb 8, 2011 at 5:32 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.