how to

2000 GMC SONOMA
4 CYL • 2WD • AUTOMATIC
Avatar
SPSMITH1
  • MEMBER
  • 1 POST
How do I replace the horn switch on a 2000 gmc sonoma. The horns are good, the fuse is good, the relay is good. The only other thing I can think of is the switch/button. I have never done this on a vehicle with air bags.
Mar 1, 2011 at 3:35 PM
Advertisement
Avatar
JDL
  • ✓ASE Certified Mechanic
  • 16,098 POSTS
  • ASE Certified Mechanic
There is a safety issue with air-bags. Safety is your responsibility. There is an sir fuse, interior fuse box, unplug it. Wait about 20 seconds. There should be yellow two wire connector, base of steering column, unplug it. You may have to remove lower part of dash. Also, passenger side air-bag, unplug yellow two wire connector behing glove box. Then, it should be safe to work on. You still need to be cautious.
Mar 1, 2011 at 7:40 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.