2000 gmc Jimmy 4x4 replace tie rods, idle arm and pitman arm

2000 GMC JIMMY
120,000 MILES
Avatar
DRELECTRIC
  • MEMBER
  • 4 POSTS
If there is anything in particular I should know please help thanks. No credit card to give donation sorry
Oct 14, 2011 at 10:04 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,240 POSTS
When you replace the tie rods, measure the distance from the where the tie rod screws in to the end of the tie rod. Make sure the new one is the same when you install it. The other items are straight forward. NOTE: You should have the alignment checked after replacing the tie rods.
Oct 14, 2011 at 10:18 PM
Avatar
DRELECTRIC
  • MEMBER
  • 4 POSTS
Thanks ,do you mean from the end of the adjuster sleeve to the end of tie rod . I will get it lined up also thanks.:)
Oct 14, 2011 at 11:11 PM
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,240 POSTS
Yes, from the sleeve to the end.
Oct 15, 2011 at 10:27 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.