2000 Ford Taurus blend door actuator

2000 FORD TAURUS
170,000 MILES • 3.8L • 6 CYL • FWD • AUTOMATIC
Avatar
IGBED
  • MEMBER
  • 1 POST
I have a 2000 Ford Taurus. My issue is the AC/Heater blend door actuator is not changing state when the electronic control buttons are engaged. Is there another module that communicates between the two? Can you give me expected voltage readings at the pigtail that connects to the actuator?
Sep 29, 2015 at 5:57 PM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
pull fuse 232 in central junction box for 60 seconds with key on. see if resets. there should be about 5 volts going to it but it should be scanned by a pro to see If that is the actual problem the shaft may be broken from the door.
Sep 30, 2015 at 7:08 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.