how to replace ac blower motor in 2000 ford explorer
May 27, 2011 at 11:35 PM
blower motor
2000 FORD EXPLORER
TIM GRANT
- MEMBER
- 2 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
BLOWER MOTOR & FAN
Removal & Installation
Disconnect negative battery cable. Remove speed control servo from its mounting and position out of way. Remove coolant/washer reservoir mounting bolts and position it aside.
Disconnect blower motor cooling tube from blower motor. Disconnect harness connector. Remove 4 blower motor mounting plate attaching screws. Remove blower motor and wheel from evaporator assembly. To install, reverse removal procedure
Removal & Installation
Disconnect negative battery cable. Remove speed control servo from its mounting and position out of way. Remove coolant/washer reservoir mounting bolts and position it aside.
Disconnect blower motor cooling tube from blower motor. Disconnect harness connector. Remove 4 blower motor mounting plate attaching screws. Remove blower motor and wheel from evaporator assembly. To install, reverse removal procedure
May 28, 2011 at 8:46 AM
Advertisement