Reprograming remotes (key fobs)

Tiny
2000TJG
  • MEMBER
  • 2000 FORD CROWN VICTORIA
  • 71 MILES
I read the instructions below on one of your threads about the DDM. Excellent article! Outstanding troubleshooting steps! It's my exact problem.

I'm getting ready to replace my DDM.
1. Should I disconnect hte battery before I hook up hte new DDM? And,
2. When performing the steps below, since I have the auto headlight ON feature, should I turn this OFF? I.E. Keep the headlights are OFF?

"To reprogram the remotes was a snap. Here's the procedure.
WHILE INSIDE THE CAR, WITH THE DOORS CLOSED,
TURN THE IGNITION FROM OFF TO ON, 4-TIMES (WITHIN 3-SECONDS), THE LOCKS SHOULD CYCLE.
DEPRESS ANY BUTTON ON AS MANY AS FOUR REMOTES (LOCKS CYCLED TO CONFIRM).
RETURN IGNITION TO OFF POSITION. YOU'RE DONE."


Thanks for your help.
Wednesday, January 18th, 2012 AT 3:02 AM

3 Replies

Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
Our pleasure. Happy to help. Be sure to tell your friends about us.
Was this
answer
helpful?
Yes
No
Wednesday, January 18th, 2012 AT 8:24 AM
Tiny
2000TJG
  • MEMBER
  • 3 POSTS
Hi,
I think you confirmed the re-program procedure that I quoted from a past article but I didn't see an answer to my 2 questions.

I'm getting ready to replace my DDM.
1. Should I disconnect the battery before I hook up the new DDM? And,
2. When performing the steps, since I have the auto headlight ON feature, should I turn this OFF? I.E. Keep the headlights are OFF?

Thanks again,
JG
Was this
answer
helpful?
Yes
No
Wednesday, January 18th, 2012 AT 12:28 PM
Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
I would disconnect the battery, yes. The instructions don't say anything about the headlights.
Was this
answer
helpful?
Yes
No
Wednesday, January 18th, 2012 AT 6:45 PM

Please login or register to post a reply.

Sponsored links