What hubs do I need for a 2000 ford F450 with a 8 lug x 8 7\8 pattern. 2 wheel drive 7.3L
Friday, June 24th, 2011 AT 11:19 PM
3 Replies
HMAC300
MECHANIC
48,601 POSTS
Don'tunderstand what you are talkingabout. It may be a whole assy. But you may also have bearings that can be replaced. It should be just a hub that unbolts from behind.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, June 24th, 2011 AT 11:40 PM
CALIFBINTOOL1
MEMBER
2 POSTS
There is a hub assy that's replaceable on the front axle. The ones listed at all the parts houses have a 4 bolt pattern to replace them. The one I have has eight bolts holding it on. The lug pattern is eight studs also, the norm is 6 to 6.75 width but I have 8.875 spacing between lubs. The wheel part number that fits is ford F81A-1015-DA. Hope this helps.
Was this
answer
helpful?
Yes
No
Saturday, June 25th, 2011 AT 12:47 AM
HMAC300
MECHANIC
48,601 POSTS
Because this is a truck we don't have info for this model. Where ever you got it is obviously theworng one. Also because of the size of this truck go back and make sure you have production date of truck as this can make a big difference. I think what the are selling you is one for a f350 and not a 450. It might depend also on whataxle you have on the front for weight, that will help as well. It should be on your tag on door or underhood.