Brake constantly being applied

2000 DODGE STRATUS
191,000 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
STEVEPOONS
  • MEMBER
  • 12 POSTS
After releasing brake pedal, one brake is still partly on. ABS light is on as well, but unsure if related
Jul 28, 2011 at 7:34 PM
Advertisement
Avatar
DOCFIXIT
  • ✓ASE Certified Mechanic
  • 18,828 POSTS
  • ASE Certified Mechanic
Likely a sticking caliper that needs replaced also have ABS scanned for codes when light on ABS is deactivated. And you may need that feature someday
Jul 28, 2011 at 7:43 PM
Avatar
STEVEPOONS
  • MEMBER
  • 12 POSTS
I have already replaced the caliper, and have scanned the ABS with no codes returned. The sensor stated that my vehicle did not supprt the ABS scanning feature
Jul 28, 2011 at 7:46 PM
Avatar
RASMATAZ
  • ✓ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
Check the brake hose on that side could have collasped internally acting as a one way check valve
Jul 28, 2011 at 11:39 PM
Avatar
STEVEPOONS
  • MEMBER
  • 12 POSTS
How would I check for this?
Jul 29, 2011 at 1:11 PM
Avatar
DOCFIXIT
  • ✓ASE Certified Mechanic
  • 18,828 POSTS
  • ASE Certified Mechanic
apply brakes when caliper stuck open bleeded if fluid comes out and wheel turns free replace flex hose
Jul 29, 2011 at 2:30 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.