Engine runs rough at all RPM's. Was running well. Suddenly started running rough
Thursday, June 19th, 2014 AT 3:54 PM
7 Replies
JACOBANDNICKOLAS
MECHANIC
109,755 POSTS
Has the check engine light come on?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, June 19th, 2014 AT 8:53 PM
JWELLS0735
MEMBER
16 POSTS
Yes the check engine light has come on and gone back off.
If I accelerate fast the van has plenty of power.
Was this
answer
helpful?
Yes
No
+1
Friday, June 20th, 2014 AT 7:45 AM
JWELLS0735
MEMBER
16 POSTS
Replaced ignition coil and plug wires. No help
Was this
answer
helpful?
Yes
No
Friday, June 20th, 2014 AT 4:55 PM
JWELLS0735
MEMBER
16 POSTS
Also scan codes showed multiple misfires.
Was this
answer
helpful?
Yes
No
Friday, June 20th, 2014 AT 4:58 PM
JACOBANDNICKOLAS
MECHANIC
109,755 POSTS
Were the plugs changed? Have you checked fuel pump pressure as well as the regulator?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, June 20th, 2014 AT 7:47 PM
JWELLS0735
MEMBER
16 POSTS
Now I have replaced coil, plugs and wires. Fuel pressure is about 55psi at fuel rail. Still no change in rough running.
When I changed plugs there was a raw gas smell in cylinders.
Was this
answer
helpful?
Yes
No
Saturday, June 28th, 2014 AT 7:15 PM
JACOBANDNICKOLAS
MECHANIC
109,755 POSTS
Have you checked the computer to see what trouble codes may still be stored? If I remember correctly, you should be able to do it without a scanner.
Cycle the key from off to the run position (not start) 3 times. The 3rd time, let the key on / engine off. It should read the codes in the odometer area.