I need the Timing belt and cam gears positioning on a 2000 Daewoo Leganza

2000 DAEWOO LEGANZA
FWD • AUTOMATIC
Avatar
LSFOOOSURTLEVER
  • MEMBER
  • 10 POSTS
I took the timeing gear off the cam and it moves so i need to know were the cam has to be to with the marks i dont know much about timeing and cams thanks
Mar 8, 2011 at 11:28 PM
Advertisement
Avatar
MHPAUTOS
  • ✓Experienced Mechanic
  • 31,937 POSTS
Did you have the engine set at TDC #1 before removing the timing belt?

Mark (mhpautos)
Mar 9, 2011 at 1:08 AM
Avatar
LSFOOOSURTLEVER
  • MEMBER
  • 10 POSTS
the head gasket was blowen and it ran but now i got the head off so what do i do i got one cam off and the timin gear is off the cam on the other one what do i do? just put the gear back on and go to the timein marks?
Mar 9, 2011 at 10:24 AM
Avatar
MHPAUTOS
  • ✓Experienced Mechanic
  • 31,937 POSTS
As long as all the timing marks are aligned when you fit the head and they do not alter while fitting the belt, you will be fine, can you see all the timing marks?
Mar 9, 2011 at 1:19 PM
Avatar
LSFOOOSURTLEVER
  • MEMBER
  • 10 POSTS
yes what ones do i use and to 12 and six on the bottom but i need detail about were and what ones and how to tourk the head down i know there is a certin way
Mar 10, 2011 at 10:14 AM
Avatar
MHPAUTOS
  • ✓Experienced Mechanic
  • 31,937 POSTS
Align as per pic, crank at 6-00 o'clock cams as pic indicates
Images (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Mar 10, 2011 at 1:45 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.