power locks dont work I can only lock or unlock them manually?

2000 CHRYSLER INTREPID
96,000 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
JUSTICE5466
  • MEMBER
  • 1 POST
i just bought a 2000 Chrysler intrepid and the power locks dont work i can only lock or unlock them manually and im not sure how to diagnose the problem
Dec 9, 2010 at 5:22 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
SQM
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 6,383 POSTS
Hello,

This issue could be due to a faulty door lock relay or door lock actuator.
The door lock relay is located in the fuse box under the dash (see diagram).
Check for any corrosion or burn pin(s) on the relay.
They can also be tested for functionality.

https://www.2carpros.com/articles/how-to-check-an-electrical-relay-and-wiring-control-circuit

If the relay is functional then the issue could be wiring to the actuator or faulty actuator.
Check to see if the connector is secured to the actuator. Also look for any damage or loose pin. Also check for continuity to the connector.

https://www.2carpros.com/articles/how-to-check-wiring

I have attached diagrams for your reference.

Please let me know if you have any questions.
Thank you.
Jan 15, 2022 at 8:09 PM
Advertisement