2000 Chrysler Cirrus Year 2 4 L Automatic Transmision Cooling System

2000 CHRYSLER CIRRUS
85,000 MILES
Avatar
JUREKT21
  • MEMBER
  • 3 POSTS
What can be the problem with my chrysler cirrus 2000 year 2.4 l automatic transmision with cooling system after when the ingine is hot the cooling fan starting working and running all times during the continue driving?
Nov 20, 2012 at 9:39 PM
Advertisement
Avatar
SATURNTECH9
  • ✓ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
Are you using the ac?Also any codes in the computer?
Nov 20, 2012 at 10:25 PM
Avatar
JUREKT21
  • MEMBER
  • 3 POSTS
I do not using A/c and no codes
Nov 20, 2012 at 10:28 PM
Avatar
SATURNTECH9
  • ✓ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
So what temp does the fan come on at?Also if you cycle the key off then on does the fan turn off after it came on and wouldnt shu off?
Nov 20, 2012 at 10:55 PM
Avatar
JUREKT21
  • MEMBER
  • 3 POSTS
The fan come on 1/3 of the temp. gauge, car do not shoving exact temp.after when I stop the engine the fan stop working
Nov 20, 2012 at 11:04 PM
Avatar
SATURNTECH9
  • ✓ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
The best thing to do which is what i would do is get a infared temp gun to measure coolant temp when the fan comes on then you can see if it cools down enough for the fan to turn off.Also a scan tool that reads live engine data would be helpful to so we can see what the coolant temp sensor is reading.Also when the fan turns on are both upper and lower radiator hoses getting really hot?
Nov 21, 2012 at 6:21 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.