how to put a car thermustat on chevy venture 2000
Feb 14, 2011 at 3:45 PM
How to put a thermustat
LIZRIOS
- MEMBER
- 1 POST
Advertisement
Remove the air cleaner intake duct.
Partially drain the cooling system.
Remove the radiator inlet hose from the thermostat housing.
Remove the thermostat housing bolts.
Remove the thermostat.
Clean and inspect the thermostat housing gasket mating surfaces.
To install:
Install the thermostat.
Install the thermostat housing.
Install the thermostat housing bolts and tighten to 18 ft. lbs. (25 Nm).
Install the radiator inlet hose to the thermostat housing.
Install the air cleaner intake duct.
Fill the cooling system.
Start the engine and check for leaks.
Partially drain the cooling system.
Remove the radiator inlet hose from the thermostat housing.
Remove the thermostat housing bolts.
Remove the thermostat.
Clean and inspect the thermostat housing gasket mating surfaces.
To install:
Install the thermostat.
Install the thermostat housing.
Install the thermostat housing bolts and tighten to 18 ft. lbs. (25 Nm).
Install the radiator inlet hose to the thermostat housing.
Install the air cleaner intake duct.
Fill the cooling system.
Start the engine and check for leaks.
Feb 18, 2011 at 12:55 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.