Hard to start when hot.

119 MILES
Avatar
HROB
  • MEMBER
  • 1 POST
I have had a problem with hot starts with my 2000 Silverado 5.3 engine.
It starts right up when cold or within 5 minutes of running at fully hot.
Aftger 5 minutes or so, it takes turning over up to 10 seconds before starting and then it idles rough for a short time. I took it to the closest Chevy dealer and they checked it over and were perplexed having never had a problem like
that. They check the computer, checked the fuel pump (good pressure), cleaned out the fuel line and installed a new fuel filter. I put this on the internet and someone said it was the Engine Coolant temperature sensor.
I changed that today but I still have the problem. ANY IDEAS?

Thanks
hr
Mar 23, 2012 at 9:29 AM
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
check the crank an dcam sensors for ohms. If resistance to high replacewhich one has the high resistance. tehse can do this without setting a code. also clean your throttle plate with choke cleaner on both sides as well as iac hole.
Mar 23, 2012 at 9:53 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle

Advertisement