2000 Chevrolet S-10 OBD scanner

Tiny
ROGER6632
  • MEMBER
  • 2000 CHEVROLET S-10
  • 4.3L
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 198,000 MILES
I pluged in my obd-2 scanner and had only three icons that were complete and not flashing
the rest took alittle driving, now after 200 miles I have 8 steady icons and only one that is still flashing
it, s the one that says es, can, t get it to stop flashing and can, t get a sticker untill it stops, any idea, s
what I can do to stop it from flashing?This all started when I cleared a code po140, o2 sensor
i replaced it, I have no codes on now, only that flashing es icon on the scanner

Saturday, December 13th, 2014 AT 7:46 PM

6 Replies

Tiny
MHPAUTOS
  • MECHANIC
  • 31,937 POSTS
Do a code clear and re dive, report what codes have re set, not sure what you mean by flashing icons, more details on that would be good.
Was this
answer
helpful?
Yes
No
Saturday, December 13th, 2014 AT 8:33 PM
Tiny
ROGER6632
  • MEMBER
  • 19 POSTS
Ok, on your hand held obd-2 scanner, there are 9 icons
they are mm/fs/cc/cm/es/sa/os/oh/egr. All should be steady
and not flashing, if some are flashing it means it, s not ready
while I have one that keeps flashing the es icon, im trying to stop it from flashing so it will be complete and I can pass a sticker check.I put 200
miles on my truck and it still flashes, any idea, s
Was this
answer
helpful?
Yes
No
Sunday, December 14th, 2014 AT 6:45 AM
Tiny
ROGER6632
  • MEMBER
  • 19 POSTS
I forgot to metsion there are no codes showing
Was this
answer
helpful?
Yes
No
Sunday, December 14th, 2014 AT 10:12 AM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,937 POSTS
If you have no fault cods and no check light on, you should not have a problem, not sure about this flashing light unit, not one we use in my business.
Was this
answer
helpful?
Yes
No
Monday, December 15th, 2014 AT 1:42 AM
Tiny
ROGER6632
  • MEMBER
  • 19 POSTS
On my obd-2 scanner the es monitor is flashing all the other ones are steady
what can I do to stop the es monitor from flashing, thanks
Was this
answer
helpful?
Yes
No
Thursday, December 25th, 2014 AT 5:21 PM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,937 POSTS
As thought run a scan and go into the ABS system and make sure all the wheel speed sensors are working.
Was this
answer
helpful?
Yes
No
Tuesday, December 30th, 2014 AT 4:34 AM

Please login or register to post a reply.

Sponsored links