2000 Chevrolet S 10 Hi Someone Cut Power Cord Starter Reconnect

15,000 MILES
Avatar
RYANK44
  • MEMBER
  • 9 POSTS
I need to know where to splice the cord to on the starter without having to pull the starter out.
Nov 28, 2011 at 7:06 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
Which wire was cut? The one from the battery? If so, disconnect the neg terminal before doing anything. That wire supplies power direct from the battery all the time. Then, replace the entire cable.
Nov 28, 2011 at 7:08 PM
Avatar
RYANK44
  • MEMBER
  • 9 POSTS
The wire was cut right from the starter motor itself.
Nov 28, 2011 at 7:11 PM
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
Please disconnect the battery until I get this figured out for you. I need to see a picture of what was cut to be sure. Can you upload a pic for me to see?
Nov 28, 2011 at 7:25 PM
Avatar
RYANK44
  • MEMBER
  • 9 POSTS
I can try to. but it actually looks like it came off of the boot that goes onto the starter that bolts onto it. but when i pulled the starter off i didnt see the metal boot that goes onto it ( i bought a new starter) so i dont know if i would be able to splice it on to the starter without the metal boot.
Nov 28, 2011 at 7:32 PM
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
When you say metal boot, are you refering to the steel ring that bolts to the starter? If so, that will already be on the new battery cable that runs to the starter. That isn't a wire I recommend splicing. Too much power is supplied through it.
Nov 28, 2011 at 7:43 PM
Avatar
RYANK44
  • MEMBER
  • 9 POSTS
Yes thats what i mean. But i didnt replace the wire. I just pulled the starter off and the only wire that was connected was the solenoid cable. it just looks like it came off the metal ring, but i cant find the metal ring anywhere.
Nov 28, 2011 at 7:46 PM
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
If it is the smaller wire, you can get a new end that crimps on. If it is the bigger wire, replace it.
Nov 28, 2011 at 7:53 PM
Avatar
RYANK44
  • MEMBER
  • 9 POSTS
And how much is a new cable?
Nov 28, 2011 at 7:54 PM
Avatar
CJ MEDEVAC
  • ✓Experienced Mechanic
  • 11,000 POSTS
MAYBE THE METAL RING IS NOW TRANSFORMED INTO A WASHER UNDER THE NUT?

I MAY HAVE ENTERED THIS INFO WRONG--REDO IF IT IS

http://www.autozone.com/autozone/parts/Lynx-O-e-Battery-Cable/2000-Chevrolet-S10-P-U-2WD/_/N-je3y2Z8gcx6?counter=0&filterByKeyWord=POSITIVE+BATTERY+CABLE&fromString=search&itemIdentifier=831028_120222_7849_

KEEP US INFORMED

THE MEDIC
Nov 28, 2011 at 8:01 PM
Avatar
RYANK44
  • MEMBER
  • 9 POSTS
Thanks man, i'll have to go into auto zone tomorrow and see what they say. Hopefully i dont have to replace the whole cable being since its almost 200 bucks.
Nov 28, 2011 at 8:08 PM
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
The cable will be around ten dollars.
Nov 28, 2011 at 8:08 PM
Avatar
RYANK44
  • MEMBER
  • 9 POSTS
ok thanks. i just hope thats not whats wrong. because even with my new starter in it still makes the clicking noise.
Nov 28, 2011 at 8:10 PM
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
Who told you a battery cable is 200 dollars? My god no... Maybe around ten dollars.

If you can, please upload a pic so I can see what you are dealing with. And let me know how it goes for you.

Joe
Nov 28, 2011 at 8:36 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle