how do i replace tps
Jul 18, 2011 at 2:05 AM
2000 chevy prizm
2000 CHEVROLET PRIZM
PATTI1974
- MEMBER
- 1 POST
- FOLLOW
Advertisement
Removal & Installation
1. Disconnect negative battery cable. Disconnect harness connector from TP sensor. Remove TP sensor retaining screws. Remove TP sensor from throttle body.
2. To install, mount TP sensor on throttle body with alignment slots slightly counterclockwise of body holes. Turn TP sensor clockwise to align holes and install retaining screws finger tight. To complete installation, reverse removal procedure. Tighten TP sensor retaining screws to specification.
1. Disconnect negative battery cable. Disconnect harness connector from TP sensor. Remove TP sensor retaining screws. Remove TP sensor from throttle body.
2. To install, mount TP sensor on throttle body with alignment slots slightly counterclockwise of body holes. Turn TP sensor clockwise to align holes and install retaining screws finger tight. To complete installation, reverse removal procedure. Tighten TP sensor retaining screws to specification.
Jul 18, 2011 at 1:30 PM