Monday, July 18th, 2011 AT 2:05 AM
PATTI1974
- MEMBER
- 2000 CHEVROLET PRIZM
- 4 CYL
- AUTOMATIC
- 155,000 MILES
How do I replace tps
2000 Chevy Prizm
1 Reply
KHLOW2008
- MECHANIC
- 41,814 POSTS
Removal & Installation
1. Disconnect negative battery cable. Disconnect harness connector from TP sensor. Remove TP sensor retaining screws. Remove TP sensor from throttle body.
2. To install, mount TP sensor on throttle body with alignment slots slightly counterclockwise of body holes. Turn TP sensor clockwise to align holes and install retaining screws finger tight. To complete installation, reverse removal procedure. Tighten TP sensor retaining screws to specification.
1. Disconnect negative battery cable. Disconnect harness connector from TP sensor. Remove TP sensor retaining screws. Remove TP sensor from throttle body.
2. To install, mount TP sensor on throttle body with alignment slots slightly counterclockwise of body holes. Turn TP sensor clockwise to align holes and install retaining screws finger tight. To complete installation, reverse removal procedure. Tighten TP sensor retaining screws to specification.
SPONSORED LINKS
Was this helpful?
Yes
No
+2
Monday, July 18th, 2011 AT 1:30 PM
Related Throttle Position Sensor Replace/Remove Content
Sponsored links
SPONSORED LINKS
Code Read Retrieval/Clear Mercedes-Benz C230
Code Read Retrieval/Clear - Dodge Stratus
Code Read Retrieval/Clear Scion
