2000 CHEVROLET MONTE CARLO
165,000 MILES
Avatar
KIMMERSKORNER
  • MEMBER
  • 2 POSTS
Check engine light is on. Have disconnected the battery, driven the car and the P0102 code still comes up. As the car is in park and I hit the accelerator it hesitates, let off accellerator and it jumps up to 2500 rpm. I have cleaned and changed the air flow sensor and I still get the same code
Dec 9, 2012 at 5:28 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
KIMMERSKORNER
  • MEMBER
  • 2 POSTS
I had the code cleared and drove it 60 miles and the check engine light never came on. I turned the car off and started it back up and the light came back on.
Dec 9, 2012 at 5:35 AM
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
scan for codes again see if it's the same one. if it is check for air leaks between maf an dthrottle if you have one of thos K&n type filtersspray choke cleaner on teh maf cause it probaly has to much oil on it. but also check for air leaks on engtire engine like grommets, etc. make sure pcv system working ok.
Dec 9, 2012 at 4:21 PM
Advertisement