how to install a master cylinder on a 2000 chevy malibu
Dec 17, 2010 at 12:41 PM
master cylinder
2000 CHEVROLET MALIBU
IRISHBREW77
- MEMBER
- 1 POST
Advertisement
Removal Procedure
Disconnect the electrical connector from the fluid level switch (2).
Remove the brake pipe tube nuts (3,4) from the master cylinder assembly.
Plug the open brake pipes (3,4) in order to prevent brake fluid loss and contamination.
Remove the master cylinder mounting nuts (5).
Remove the master cylinder (1) from the booster (3).
Disconnect the electrical connector from the fluid level switch (2).
Remove the brake pipe tube nuts (3,4) from the master cylinder assembly.
Plug the open brake pipes (3,4) in order to prevent brake fluid loss and contamination.
Remove the master cylinder mounting nuts (5).
Remove the master cylinder (1) from the booster (3).
Images (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Dec 17, 2010 at 1:03 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.