Removed delco in dash raido-orig

Tiny
VINSTER
  • MEMBER
  • 2000 CHEVROLET CAMARO
  • 92,000 MILES
Removed delco in dash raido-orig., And then reinstalled the same raido, only now the front and rear speakers do not work. Is there some kind of fuse or relay that I should now about?
Thursday, November 29th, 2012 AT 3:47 AM

1 Reply

Tiny
CARADIODOC
  • MECHANIC
  • 33,910 POSTS
There may be a remote amplifier that isn't turning on. The fuse for it could be blown, but given the recent history it's more likely it's not getting the turn-on signal from the radio. Double-check the connectors, and be sure no pins have pushed out in them. The two smaller plugs with four wires each are the speaker wires. One larger plug might not be used, but check the wires in the other one. If you do that with the ignition switch turned on, it will be obvious if you have a bad connection and it starts working.
Was this
answer
helpful?
Yes
No
Thursday, November 29th, 2012 AT 4:54 AM

Please login or register to post a reply.

Sponsored links