Advertisement

2000 blazer missing with heavy acceleration

125,000 MILES • 6 CYL • 4WD • AUTOMATIC
Avatar
LEVICGARRETT
  • MEMBER
  • 1 POST
I have a 2000 chevrolet s10 blazer 2 dr 4wd vortec 4.3; vehicle is missing/stalling with heavy acceleration. Noticed battery light come on momentarily when this happens. Certain it is not fuel related, as I just replaced the fuel pump/filter recently. Also vehicle has no cat. No problem at idle or revving up engine while in park or neutral. Any ideas?
Apr 5, 2011 at 10:36 AM
Advertisement
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,988 POSTS
Could be caused by one of the following below

Oxygen sensor.
Catalytic converter.
Fuel injectors dirty/sticking.
Mass airflow sensor/Airflow meter.
Throttle position sensor.
Crankshaft position sensor
Knock sensor
Manifold absolute pressure sensor.
EGR Valve
Fuel pressure regulator leaking or defective fuel pump.
Fuel contamination.
Foul/defective spark plugs.
Open spark plug wires.
Ignition coil/Coil packs defective.
Incorrect ignition timing.
Cap and rotor.

Note:If it doesn't apply disregard it and keep testing
Apr 5, 2011 at 12:30 PM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle