Advertisement

transfer case lights would switch on their own

Avatar
JSCARCAT
  • MEMBER
  • 1 POST
problem began about a year ago, auto transfer lights would switch on their own, last winter couldn't use auto4wd, mechanic replaced a vacuum hose on solenoid-able to engage 2hi & left in that position, started acting up again after a month or so / currently shifts into 4lo-can't drive thanks Jim
Jul 24, 2011 at 4:51 PM
Advertisement
Avatar
STEVE W.
  • ✓Experienced Mechanic
  • 15,418 POSTS
If you push the buttons and the lights flash BUT you don't hear the encoder motor OR the relays in the transfer case control module (tucked in the passenger foot well behind the kick plate)clicking. the control switches in the dash have failed. Common problem with them. If the lights flash and you DO hear the control module clicking but no encoder motion then it's the control module itself, or the actuator. Look online and you will find a way to test the encoder with a meter and a jumper wire to the battery.
May 14, 2021 at 5:29 AM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle

Advertisement