Change fanmotor in BMW 528i
Nov 2, 2011 at 12:41 PM
Change fanmotor in BMW 528i
2000 BMW 528
TOMS
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
BLOWER MOTOR
Removal & Installation
Remove top of instrument panel. Remove foam rubber mat. Release clips and pry out ventilation duct. Slide connecting rail to one side. Pull both linkages out of flaps. Release clips and remove blower cover from lugs.
See Fig. 4 . Disconnect electrical connector. Remove blower motor screws. Remove blower motor. See Fig. 5 . To install, reverse removal procedure. Insert lugs in cover first. Then attach clips.
Fig. 5: Identifying Blower Motor Components
Courtesy of BMW OF NORTH AMERICA
pics enclosed
Removal & Installation
Remove top of instrument panel. Remove foam rubber mat. Release clips and pry out ventilation duct. Slide connecting rail to one side. Pull both linkages out of flaps. Release clips and remove blower cover from lugs.
See Fig. 4 . Disconnect electrical connector. Remove blower motor screws. Remove blower motor. See Fig. 5 . To install, reverse removal procedure. Insert lugs in cover first. Then attach clips.
Fig. 5: Identifying Blower Motor Components
Courtesy of BMW OF NORTH AMERICA
pics enclosed
Images (Click to enlarge)
Nov 2, 2011 at 7:12 PM
Advertisement