SPONSORED LINKS

Should check besides MAF sensor on air filter?

Tiny
TONI KUKKE
  • MEMBER
  • 2008 MAZDA 6
  • 2.0L
  • 4 CYL
  • TURBO
  • 2WD
  • MANUAL
  • 200,000 MILES
Can you tell me are there any sensor's I should check besides MAF sensor on air filter box. Added pictures from diagnostics.
Images (Click to make bigger)
Thumb
Thumb
Tuesday, September 27th, 2022 AT 10:31 PM

5 Replies

Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 48,363 POSTS
I would replace the MAF sensor and then clear the codes. Drive it for a while and see if the check engine light comes back on. Does the engine seem to run okay?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, September 28th, 2022 AT 5:32 PM
Tiny
TONI KUKKE
  • MEMBER
  • 20 POSTS
Changed MAF and MAP sensor both, engine light is gone, power is still not back.
Was this
answer
helpful?
Yes
No
Wednesday, September 28th, 2022 AT 9:19 PM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 48,363 POSTS
With that many miles I would remove the inlet or outlet pipe from the turbo and check the endplay for excessive movement. This guide may help:

https://www.2carpros.com/articles/how-turbo-chargers-work

Can you hear the turbo spool up? Let us know what happens and please upload pictures or videos of the problem.
Was this
answer
helpful?
Yes
No
Thursday, September 29th, 2022 AT 1:31 PM
Tiny
TONI KUKKE
  • MEMBER
  • 20 POSTS
Turbo is brand new on Car, just replaced it 500 miles ago.
Was this
answer
helpful?
Yes
No
Thursday, September 29th, 2022 AT 9:58 PM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 48,363 POSTS
Can you hear the turbo spool when under load? I would check the air filter to make sure it is not plugged and if not change out the fuel filter.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, September 30th, 2022 AT 12:16 PM

Please login or register to post a reply.

Related Air Filter Housing Content

VIEW MORE

Sponsored links