How to remove my ignition barrel for the car listed above GLS model?
Mar 9, 2018 at 3:19 PM
removing a ignition tumbler
CHARLIE SMILEY
- MEMBER
- 3 POSTS
Advertisement
With ignition key turned to ACC position, press the locking pin (tab) on the outer housing and pull out the key cylinder.
Image (Click to enlarge)
Mar 10, 2018 at 2:04 PM
No locking pins on outer housing just two very small pins top of housing. do i drill them out?
Image (Click to enlarge)
Mar 10, 2018 at 8:31 PM
With Key in ACC, are you able to push at the pin and make them go inwards? If yes then that would allow you to remove the cylinder. If not you would have to drill them out. You can try tapping at the cylinder to dislodge the pin, which would slowly come out if it is the type that is punched in during installation, usually done when after market theft proof keys are used.
Mar 12, 2018 at 12:49 AM
Thanks for your help it is most appreciated.
Mar 12, 2018 at 5:57 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.