Replacement of starter?
Dec 29, 2012 at 7:06 PM
1999 Toyota Camry Replacement Starter
ANONYMOUS
- MEMBER
- 1 POST
REMOVAL
REMOVE BATTERY AND TRAY
w/ CRUISE CONTROL SYSTEM: REMOVE CRUISE CONTROL ACTUATOR
Disconnect the actuator connector and clamp.
Remove the 3 bolts, and disconnect the actuator with the bracket.
3. REMOVE STARTER
Disconnect the starter connector.
Remove the 2 bolts, throttle cable clamp (A/T) and starter.
Remove the nut, and disconnect the starter cable. Torque: 37 Nm (380 kgf.cm, 27 ft.lbf)
INSTALLATION
Installation is in the reverse order of removal.
since you provided no info on motor, i assumed it was a 4 cylinder.
roy
REMOVE BATTERY AND TRAY
w/ CRUISE CONTROL SYSTEM: REMOVE CRUISE CONTROL ACTUATOR
Disconnect the actuator connector and clamp.
Remove the 3 bolts, and disconnect the actuator with the bracket.
3. REMOVE STARTER
Disconnect the starter connector.
Remove the 2 bolts, throttle cable clamp (A/T) and starter.
Remove the nut, and disconnect the starter cable. Torque: 37 Nm (380 kgf.cm, 27 ft.lbf)
INSTALLATION
Installation is in the reverse order of removal.
since you provided no info on motor, i assumed it was a 4 cylinder.
roy
Dec 29, 2012 at 7:17 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.