How do I remove the drive axles from transaxle?
Mar 2, 2012 at 12:17 AM
1999cameryaxlerepair
1999 TOYOTA CAMRY
HAROLDP
- MEMBER
- 1 POST
Advertisement
DRCRANKNWRENCH1
- ✓ASE Certified Mechanic
- 3,435 POSTS
First you have to remove tires then you will see a large nut on the hub. you will need a breaker bar or impact to remove it and it will be large, generally a 32 mm nut. Once removed you will have to remove enough of the suspension to pull hub out of the way to slide the splined end out of the hub. This is benerally;
the lower control arm
sway arm linkage
torque bar
The you will need a large screwdriver or a pry bar to gently pry and pull the axle out of the transmsission. Make sure you use new retaining clip when re-instaling axle.
the lower control arm
sway arm linkage
torque bar
The you will need a large screwdriver or a pry bar to gently pry and pull the axle out of the transmsission. Make sure you use new retaining clip when re-instaling axle.
Mar 2, 2012 at 12:40 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.