how do you replaced a thermostat for a 1999 subaru legacy gt
Jan 7, 2011 at 2:48 AM
thermostat replacement
1999 SUBARU LEGACY
LETICIA459
- MEMBER
- 1 POST
Advertisement
RASMATAZ
- ✓ASE Certified Mechanic
- 75,992 POSTS
A: REMOVAL AND INSTALLATION
1) Drain engine coolant.
Set container under the vehicle, and remove drain **** from radiator.
2) Disconnect radiator outlet hose from thermostat cover.
3) Remove thermostat cover and gasket, and pull out the thermostat.
4) Install the thermostat in the intake manifold, and install the thermostat cover together with a gasket.
1) Drain engine coolant.
Set container under the vehicle, and remove drain **** from radiator.
2) Disconnect radiator outlet hose from thermostat cover.
3) Remove thermostat cover and gasket, and pull out the thermostat.
4) Install the thermostat in the intake manifold, and install the thermostat cover together with a gasket.
Jan 7, 2011 at 4:50 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.