1999 Saturn Sw2 Someone Tell Windhield Wiper Motor Locqted On Sw2 Get

1999 SATURN SW2
50,000 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
someone please tell me where the windhield wiper motor is locqted on a 1999 saturn sw2. how do I get to it? i have the manual but there is no explanation or pictre of where it is other than it is on the passenger side fiewall. i cannot find i there
Nov 18, 2012 at 3:18 AM
Advertisement
Avatar
RASMATAZ
  • ✓ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
-WIPER MOTOR/MODULE
Removal (Front)
Remove wiper arm. See WIPER ARM . Remove antenna from base (if equipped). Remove retaining screws from air inlet grille. Raise hood. Remove plastic retainers from air inlet grille panel. Lift right side of air inlet grille panel up toward windshield. Disconnect washer hose from air inlet grille panel. Close hood. Slide left side of air inlet grille panel up towards windshield and remove.
Remove instrument panel top cover screw caps and screws. Lift top panel at rear edge to disengage clips, and slide panel out of clips at windshield. Loosen A/C defroster duct and move to right to expose wiper module fasteners. Position wiper motor crank arm at 12 o'clock position to ease removal of wiper module.
Remove module fasteners. Partially remove module/motor and disconnect wiring. Remove module/motor. Remove crank arm nut and disconnect crank arm from motor shaft. Remove motor screws. Separate motor from module.

Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Nov 18, 2012 at 3:42 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.