do timing cover & belt have to be removed to replace front crankshaft seal? having a tough time getting to it.
Nov 4, 2012 at 1:08 AM
replace front crankshaft seal?
1999 PLYMOUTH VOYAGER
JEFF25
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Hello,
If your vehicle has the 3.3L V6 then all you will have to do is remove the crank pulley after removing the drive belt to get to the front crank seal.
If you have the 2.4L 4 cylinder then you will have to remove the timing cover and belt in order the replace the front crank seal.
https://www.2carpros.com/articles/front-main-seal-replacement
I have attached the replacement procedure for both of the engines.
Please let me know of any questions.
Thank you.
If your vehicle has the 3.3L V6 then all you will have to do is remove the crank pulley after removing the drive belt to get to the front crank seal.
If you have the 2.4L 4 cylinder then you will have to remove the timing cover and belt in order the replace the front crank seal.
https://www.2carpros.com/articles/front-main-seal-replacement
I have attached the replacement procedure for both of the engines.
Please let me know of any questions.
Thank you.
Images (Click to enlarge)
Sep 8, 2021 at 10:56 AM
Advertisement