when i am cranking the injector don't open up to let gas into the cylinder i check the injector pulse with a noid light, the light do not blink.
Aug 24, 2012 at 7:32 PM
why are the injector not open up?
JOE1953
- MEMBER
- 806 POSTS
Either the PCM is not receiving the signal to pulse the circuits or the PCM is bad.
Aug 24, 2012 at 7:38 PM
what send the signal to the pcm.
Aug 24, 2012 at 7:52 PM
The cam sensor is the primary signal for the fuel injectors. Of course other sensors such as crank needs to be working as well.
Aug 24, 2012 at 8:04 PM
oil is getting into the cam sensor where the wiring fit into it do oil suppose to be in there.
Aug 24, 2012 at 8:31 PM
No, the connectors should be dry. If oil is from external, cleaning it up wold be sufficient but if it is leaking from within the connector, the sensor is bad.
Aug 24, 2012 at 8:40 PM
how can i test a cam sensor.
Aug 24, 2012 at 8:49 PM
the cam sensor is leaking from within connector.
Aug 24, 2012 at 9:11 PM
Under such circumstances there is no need to test because it is bad causing the non starting. Replacing it is the only option.
Aug 24, 2012 at 10:27 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.