SPONSORED LINKS

Engine crank but want start?

Tiny
JOE1953
  • MEMBER
  • 1999 NISSAN MAXIMA
Fuel pump run when turn switch on and gas is getting to the fuel rail but gas is not going through the fuel injector into the cylinder, I can spray some gas into the throttle body and the engine will start.
Friday, August 24th, 2012 AT 3:01 AM

4 Replies

Tiny
MHPAUTOS
  • MECHANIC
  • 31,937 POSTS
Check injector pulse with a noid light, if no pulse you will proberbly have a faulty cam or crank angle sensor, a scan will normally show up any fault here.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, August 24th, 2012 AT 4:36 AM
Tiny
JOE1953
  • MEMBER
  • 636 POSTS
I scan the computer it have a code #1320, po325, po304
Was this
answer
helpful?
Yes
No
Friday, August 24th, 2012 AT 4:54 AM
Tiny
JOE1953
  • MEMBER
  • 636 POSTS
Where are the cam and crank angle sensor located.
Was this
answer
helpful?
Yes
No
Friday, August 24th, 2012 AT 5:49 AM
Tiny
JOE1953
  • MEMBER
  • 636 POSTS
I check injector pulse with a noid light the light will not blink, so why the noid light don't blink.
Was this
answer
helpful?
Yes
No
Saturday, August 25th, 2012 AT 1:36 AM

Please login or register to post a reply.

Related Throttle Body Content

Throttle Body Service
GUIDE
Throttle Body Service
The throttle body or throttle actuator as they are called on newer cars is used to meter the engine air intake thus controlling the engine RPM and power output via the gas...
VIEW MORE

Sponsored links