i scan the computer it have a code 1320, po325, po304, what is the meaning of theses code.
Aug 24, 2012 at 4:16 PM
where is the cam and crank angle sensor located?
1999 NISSAN MAXIMA
JOE1953
- MEMBER
- 776 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
the codes you have indicate a missfire in number 4 cylinder and the 1320 is a coil code.
forget about the sensors. start with plugs and coils. make sure it has compression.
the 325 is a ghost code and will go away when the others are fixed
Roy
forget about the sensors. start with plugs and coils. make sure it has compression.
the 325 is a ghost code and will go away when the others are fixed
Roy
Aug 24, 2012 at 4:22 PM
Advertisement
P0304 = Misfiring of cylinder # 4.
P0325 = Knock Sensor
P1320 = Ignition signal circuit.
Cam sensor is on engine front cover, facing cam sprocket.
Crank sensor, one on oil pan, facing flywheel gear teeth and the other upper oil pan facing crank pulley.
P0325 = Knock Sensor
P1320 = Ignition signal circuit.
Cam sensor is on engine front cover, facing cam sprocket.
Crank sensor, one on oil pan, facing flywheel gear teeth and the other upper oil pan facing crank pulley.
Image (Click to enlarge)
Aug 24, 2012 at 4:22 PM