Computer

there is one relay box under hood and another under dash. check for ecm fuse or computer. if you have a handbook it will point out as well where it is.

I appreciate it but no handbook here. Is it under hood or dash?

both places

Any chance of some kind of diagram showing where in each?

it shold be clearly marked. If you can't find it have apro point it out to you there are no graphics for this.

Really no fuse box diagrams? First time I have been disappointed with you guys.
Thanks

Is the check engine light on? if so the ECU will be powered up, normally a ECU fuse that has blown will kill the system and you will have no start, if they are trying to do a read and nothing is showing and the check light is on, try inducing a known code, unplug the MAP sensor or the TPI sensor and try a start, this will trip a code, and if the scan will not pick this up, you may have a problem with the ECU itself.

Mark (mhpautos)

also if no check light, check that the globe is not blown as well.

Mark (mhpautos)

You are loosing me. The check engine light has been on since I bought the car. Is the ECU the computer? If the check engine light is on then the computer works?

The ECU is the computer (engine control unit) as the check light is on, the ECU should be functioning, but the section that controls the code gathering data may be corrupt, (as you can get faults in your PC that affect only certain sections) so do the test to check this you inducing a code and ensure that a quality scanner is used operated by someone that is qualified to operate it as will.

mark (mhpautos)