want to talk the haed and the kamp,what is the nm
Dec 13, 2012 at 11:16 AM
1999 MITSUBISHI COLT
ANONYMOUS
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
do you mean you want the troque for head and cam caps? this is for an eclipse as we dont' have a colt in u.s. that year it's 2.4l engine
(3) Tighten head bolts to 58 ft. lbs. (78 N.m), in correct sequence. See Fig. 22 . Completely loosen head bolts and then tighten in sequence to 15 ft. lbs. (20 N.m). Next, tighten in sequence an additional 90
degrees. Then, in sequence, tighten another 90 degrees.
see attachement for sequence
(3) Tighten head bolts to 58 ft. lbs. (78 N.m), in correct sequence. See Fig. 22 . Completely loosen head bolts and then tighten in sequence to 15 ft. lbs. (20 N.m). Next, tighten in sequence an additional 90
degrees. Then, in sequence, tighten another 90 degrees.
see attachement for sequence
Image (Click to enlarge)
Dec 13, 2012 at 2:32 PM
Advertisement
cam sprocket 65 nm
Dec 13, 2012 at 2:32 PM