Battery

1999 MERCURY TRACER
4 CYL • FWD • MANUAL
Avatar
TMA13501
  • MEMBER
  • 1 POST
I need to know what cable wires are postive and negative for 1999 mercury Tracer. Someone took out old battery and i'm not sure which wires are what.If you have a picture or diagram that would be a big help.

Thank Tom A.
Jul 8, 2011 at 11:55 AM
Advertisement
Avatar
MERLIN2021
  • CERTIFIED EXPERT
  • 17,250 POSTS
I will look for a diagram, but the negative cable goes to engine block and positive goes to starter solenoid. Attach positive cable first!
Jul 8, 2011 at 12:22 PM
Avatar
MERLIN2021
  • CERTIFIED EXPERT
  • 17,250 POSTS
Wiring Diagram of charging system.
Jul 8, 2011 at 12:28 PM
Advertisement
Avatar
TJPATEK
  • MEMBER
  • 2 POSTS
My dad installed the battery backwards and of course nothing is working. I checked all the fuses and it appears that the main fuse is blown. I know that there are 2 screws on either side holding this fuse in. I have tried everything to get these screws off without any success. It looks like the 3/8" socket is slightly too small and a 7/16"--too large. Any suggestions on the type of tool to get these screws off?

Thanks.
Mar 5, 2012 at 2:10 AM
Avatar
MERLIN2021
  • CERTIFIED EXPERT
  • 17,250 POSTS
10mm
Mar 5, 2012 at 8:27 AM
Avatar
TJPATEK
  • MEMBER
  • 2 POSTS
Thanks. It worked. I got the main fuse out and a new one in. The car is up and running except the battery warning symbol is on. Is there another fuse that needs to be changed or a sensor that needs to be replaced?

Again, thanks for the help!
Mar 6, 2012 at 1:48 AM
Avatar
MERLIN2021
  • CERTIFIED EXPERT
  • 17,250 POSTS
check the alternator output
Mar 6, 2012 at 8:28 AM
Avatar
MERLIN2021
  • CERTIFIED EXPERT
  • 17,250 POSTS
Possibly a fuse link near the battery on the positive wires at the solenoid.
Mar 6, 2012 at 8:32 AM