right rear rotor moves slightly but wont come off is it a emergancy brake stuck or do i use brute force and hit it hard with a heavy hammer?
Oct 5, 2011 at 1:19 PM
DRCRANKNWRENCH
✓Experienced Mechanic
3,380 POSTS
There should be 2 threaded holes on the inner flange of the rotor. Find matching hardware to thread into them and then tighten them in. It will work the same way a gear puller does.
You might spray WD40 or PB Blaster on the axle flange where it meets the inner rotor flange and let it soak.
Oct 5, 2011 at 1:38 PM
CADIEMAN
✓Experienced Mechanic
3,544 POSTS
make sure there are no screws holding it on.use prenatrating oil and a hammer.strike the rotor on edge to knock it loose.if no check for holes in the center of rotor.you stick a screw on the hole and it pushs the rotor off.