SPONSORED LINKS

Keyless entry remote, doors lock but no flashing front-rear lamps and horn signal

Tiny
ZOLTAN TAHIN
  • MEMBER
  • 1999 LINCOLN TOWN CAR
  • 35,000 MILES
Dear carpros,
if I press the "lock" button on my Keyless Entry Remote - 4 Button w/ Trunk Release - then lock any doors properly, bat without one flashing of front-rear lamps and without one signal of horn.
Any funktions operation - lamps, horn, alarm etc.- Are normally.
Whats the problem?
Thanks for Your support
regards
zoltan
SPONSORED LINKS
Monday, November 14th, 2011 AT 12:27 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check the battery in your remote or try another remote if you have one.
Was this
answer
helpful?
Yes
No
Monday, November 14th, 2011 AT 2:56 PM
Tiny
ZOLTAN TAHIN
  • MEMBER
  • 2 POSTS
Dear hmac300,
thanks for the quick response! I`ve 2x remote with battery-**** 3V, both tested with DMM: 3, 01V and 3, 04V
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, November 16th, 2011 AT 3:06 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Have the module checked, it may be bad. Also check your ground on the left a pillar, that would be by your kick panelon lh side of car.
Was this
answer
helpful?
Yes
No
Wednesday, November 16th, 2011 AT 9:05 PM

Please login or register to post a reply.

Related Keyless Entry Content

Sponsored links