Fix

Tiny
OMARAMAVIZCA
  • MEMBER
  • 1999 LINCOLN TOWN CAR
  • V8
  • 2WD
  • 200,000 MILES
How to fix the water pump on a lincon town 1999
Tuesday, August 9th, 2011 AT 5:41 PM

1 Reply

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
WATER PUMP
Removal & Installation
Drain cooling system. Remove cooling fan and shroud. Release belt tensioner, and remove accessory drive belt. Remove water pump pulley. Remove retaining bolts, water pump and "O" ring.
To install, reverse removal procedure. Lubricate "O" ring with coolant before installing. Tighten bolts to specification. See TORQUE SPECIFICATIONS. Fill cooling system.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+3
Saturday, August 13th, 2011 AT 10:15 AM

Please login or register to post a reply.

Related Water Pump Content

Water Pump Symptoms
GUIDE
Water Pump Symptoms
The water pump is designed with a weep hole to allow coolant to leak from its housing before it can reach the shaft bearing which will cause the shaft to lock up and stop...
VIEW MORE

Sponsored links