1999 Isuzu Rodeo belt tensioner

1999 ISUZU RODEO
193,000 MILES
Avatar
OUTLAW3032
  • MEMBER
  • 2 POSTS
Belt tensioner seize up wont turn. Can I just change out the tensioner wheel which contains the bearings or must I replace the whole Belt tensioner part. Belt tensioner wheel and aluminum spring case. If changing just the belt tensioner wheel is possible. What are the procedures in doing so.
Nov 1, 2013 at 8:06 PM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
replace the whole tensioner and belt it's spring loaded so back away from belt then remove belt undo bolt that holds tensioner on.reverse for replacement
Nov 2, 2013 at 8:30 AM
Avatar
OUTLAW3032
  • MEMBER
  • 2 POSTS
Thank you very much captain. Took your advice changed out the tensioner and belt. Started it up and working good. Again thank you Hmac300
Nov 2, 2013 at 3:44 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.