low beam is not working

Attached is a schematic of the headlight wiring.

With headlight turned on to Low beams, check if the headlight relay is working.

If grounding the Red wire at headlight switch turns the low beams on, the headlight switch is faulty.

Thank you. I'll try to fix it. One more question. How can I get a repair manual for the same car?

You can get it from bookstores. Haynes is one of the leading publisher for shop manuals.

You can also subscribe online to sites such as Mitchell1. Here is a link to Mitchell1.

https://www.2carpros.com/manuals/manuals.php

Ok folks, thanks a lot for your help.

You're welcome.

If there is anything else, just post reply here and I would get back to you as sonn as I am online.

Have a nice day.

Hello i have a Hyundai accent 1998 model the car head lights is only working when i put a wire from the brown wire the negative of the battery can someone show me how to fix the problem?

Hey KAI999,

This looks like it could be the headlight relay, here is a guide and a diagram to help you get the problem fixed.

https://www.2carpros.com/articles/how-to-check-an-electrical-relay-and-wiring-control-circuit

and

https://www.2carpros.com/articles/how-to-use-a-test-light-circuit-tester

Please run some tests and get back to us so we can continue helping you.

Best, Ken

Hi, please check connector on Turn Signal / Light Switch. I had moulded faston. I soldered wire directly on light switch, remove damaged faston and connected wires together.

Excellent addition to this thread! Please feel free to help out whenever you are on the site :)

On a 1999 Hyundai Accent where is the headlight relay at? I’ve tried grounding the red wire at the switch, no headlights came on. Now I grounded the headlight at the light it’s self and they came on. Almost positive it’s the relay now, just need help finding it. I’ve got the underside of the dash opened up. Tired following the wires but without removing most of the tape off the wires it’s almost impossible. Any help would be greatly appreciated.

Hello,

Here is guide to help test the relay and the relay locations in the diagrams below:

https://www.2carpros.com/articles/how-to-check-an-electrical-relay-and-wiring-control-circuit

Check out the diagrams (below). Please let us know what happens.