SPONSORED LINKS

Suspension

Tiny
4GOARS
  • MEMBER
  • 1999 FORD RANGER
  • 6 CYL
  • 4WD
  • MANUAL
How do you take negative camber out of a 99 ford ranger 4 x 4(torsion bar)?
Sunday, March 27th, 2011 AT 1:55 PM

2 Replies

Tiny
MERLIN2021
  • MECHANIC
  • 17,250 POSTS
Explorer, Mountaineer & Ranger
1. To adjust caster and camber, loosen upper control arm cam bolts and install
eccentric cam. Turn cam bolt as necessary to obtain correct camber or caster
specification. See Fig. 19.
2. To adjust caster, loosen caster adjusting nuts. To increase caster split, adjust
caster bolts to move suspension arm forward. To decrease caster split, adjust
caster bolts to move suspension arm rearward. Tighten nuts to specifications. See
TORQUE SPECIFICATIONS.
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, June 26th, 2011 AT 2:54 PM
Tiny
MERLIN2021
  • MECHANIC
  • 17,250 POSTS
CAMBER & CASTER ADJUSTMENT
NOTE: Some models are equipped with square (nonadjustable)
camber/caster adjustment plates. To adjust caster/camber,
install eccentric cam kit if camber or caster adjustment is
necessary.
Was this
answer
helpful?
Yes
No
+1
Sunday, June 26th, 2011 AT 2:58 PM

Please login or register to post a reply.

Related Torsion Bar Content

VIEW MORE

Sponsored links